Hydor HCF900 Ceiling Sweep Fan
The Hydor HCF900 is a 36” sweep ceiling fan. Hydor industrial ceiling fans are designed to provide positive air movement for continuous cooling in summer, they are also specifically designed to eliminate heat stratification in winter by forcing warm or heated air down saving energy in the winter, you can wire the units to operate in either forwards or reverse direction.
A range of standard controllers are available to meet your requirements including a reversible controller for ease of switching between summer (for cooling) and winter (for heat reclamation) modes. Each controller can operate a number of fans.
The Hydor HCF900 Ceiling Sweep Fan comes with a choice of drop rod to suit application height, you can use either the 150mm or the 400mm rod, these ceiling fans have metal fan blades and therefore for safety reasons should be mounted with a minimum of 2.3 metres from the floor to the blades.
Features and Benefits
Capacitor start and run motor fitted with ball bearings. Class E insulation, suitable for 40°C ambient operating temperature.
HCF fans are supplied with two down rod lengths as standard. The short down rod is 150mm, suitable where the fans are mounted below the ceiling or roof height, for example, beams. The long down rod is 400mm in length.
An additional safety feature of the ceiling fan is a steel cable which passes through the drop rod, connecting the motor body to the J-hook mounting bracket.
Fully Reversible – Where minimal air disturbance is required, HCF fans can be fully reversed at the flick of a switch. With this setting, the air is forced upwards to the ceiling area, then gently down to the desired area, ideal for heat reclamation.
A full 12 months warranty on all HCF Models.
Ceiling to bottom to fan dimension: 610/360mm (depending on drop rod used)
Fan diameter: 900mm
Voltage 240V 50Hz
Power: 43W full speed
Air delivery 2.25m/s