Brune B500A Evaporative Humidifier
This is a Brune B500 auto-fill high capacity mobile humidifier with lots of features that make it ideal for use in museums, offices, storage areas and public places.
It’s an evaporative humidifier for rooms up to 1,000m³. All functions are controlled solely via a remote control making the unit tamper-proof once programmed.
A wireless sensor can be attached up to 30m away with a Velcro strip, the sensor transmits current room humidity back to the humidifier giving precise humidity control. This remote unit emits a warning signal as soon as the batteries need changing.
Water is held in a tank at the bottom of the unit and is pumped to the top of the humidifier to be evenly distributed down through a filter that runs around its sides. Dry air is sucked in through these moist filters and blown back out of the top of the unit, optimally humidified and filtered.
The unit’s 50 litre water tank is filled automatically via water connection at the back of the unit, there is a automatic flush system which refreshes the water in the unit keeping it fresh and clean. Once the B500 has been filled you can set the humidistat and select the fan speed using the remote control.
The B500’s fan has four manual settings and one automatic mode in which the fan is regulated up or down by the output requirement dictated by the sensor.
The digital display gives information on current room humidity, operating status, water fill level, fan speed, filter change display and its self-diagnostic system.
Dimensions: W755mm x H620mm x D365mm
Weight approx: 24kg
Supply connection: 230V/50Hz
Performance intake: approx 125Watt
Evaporation performance: 2.5 l/h at 25°C and 20%rh
Evaporation filter surface: 3.5m
Air performance: 800m³/h
Suitable for rooms up to 1000m³
Water storage: approx 50ltr
Running noise: 32 – 44dBA (depending on fan level)