Carel HumiDisk65 Humidifier
The Carel HumiDisk65 uses spinning disk technology to atomise water and transform it into millions of minute droplets which are introduced into the air by a fan where they evaporate, efficiently humidifying and cooling the air. The humidifier is controlled via a control panel and humidity sensor which is included with the humidifier.
Cold rooms, storage facilities and ripening rooms for products, such as wine, fruit and vegetables, where low humidity level causes weight loss and product spoilage;
Paper and printing facilities, where the correct level of humidity must be maintained to avoid variation in paper size and consequent misprints;
Textile industries, where the maintenance of the required humidity according to the production process and the type of material used is fundamental.
The humidifier can work with air temperatures ranging from +1°C to +35°C, and has a power consumption of just 230W. The inside tank contains a limited amount of water, around 0.055 litres, and is emptied whenever the humidifier stops atomising, thus avoiding risks to health and smells from stagnated water remaining inside the unit and guaranteeing a high level of hygiene. The unit can operate either on drinking water (mains) or demineralised water.
HumiDisk65 can be installed on a wall or can be hung by chains from the ceiling, fixings and inlet and drain hoses are included.
Humidifying capacity: 1.1 to 6.5 litres per hour adjustable
Dimensions: 600mm dia x 565mm H
Dry weight: 18kg
Water tank volume: 0.055 litres
Power consumption: 230W
Air flow: 280m³/hr
Power supply: 230V / 50Hz
Operating limits: 1-35°C, 0-100%rh
Control panel and sensor included
Certification: CE and ETL